KF-806, 807(GPC)

1. Organic SEC (GPC) Columns: General Analysis
2. Preparative Organic SEC (GPC) Columns
3. Selection of Organic SEC (GPC) Columns
4. Replacement of In-Column Solvent
5. Effect of Pore Size on Separation
6. Standard Sample Selection
7. Calibration Curves for KF-800 Series
8. Calibration Curves for KF-806L (Various Eluents: PS)
9. Comparison of Calibration Curves: Linear Type and Mixed Gel Type
10. Calibration Curves for KF-800L Series
11. Column Connection and Linear Type Columns
12. Comparison of Calibration Curves: Linear Type and Column Connection
13. Comparison of Separation: Linear Type and Column Connection
14. Effect of Solvent-peak Separation Column on Calibration Curve
15. Effect of Solvent-peak Separation Column on Separation (1)
16. Effect of Solvent-peak Separation Column on Separation (2)
17. Polystyrene Standards (6) (KF-806L)
18. Polystyrene Standards (7) (KF-807L)
19. Poly(Methyl Methacrylate) Standards (2) (KF-806L)
20. Polycarbonate Resin (1) (KF-806L)
21. Phenoxy Resin (1) (KF-806L)
22. Polycaprolactone
23. Poly(Vinyl Formal) (1) (KF-806L)
24. Poly(Vinyl Butyral) (1) (KF-806L)
25. Cellulose Acetate (3) (KF-806L)
26. Cellulose Acetate Butyrate
27. Poly(Vinyl Chloride)
28. Ethylene Vinyl Acetate Copolymer (1) (KF-806L)
29. Poly(Butyl Methacrylate)
30. Poly(Isomehtyl Methacrylate)
31. Butyl Methacrylate Isobutyl Methacrylate Copolymer
32. Styrene Butadiene ABA Block Copolymer
33. Styrene Isoprene ABA Block Copolymer
34. Styrene Ethylenre Butylene ABA Block Copolymer
35. Biodegradable Polymer (1) (Bionolle)
36. Polystyrene Standards (10) (Toluene Eluent)
37. Dimethyl Silicone Oil (Toluene Eluent)
38. Rubber (Tluene Eluent)
39. Polystyrene Standards (19) (DMAc Eluent)
40. Polystyrene Standards (20) (NMP Eluent)
41. Dextran (2) (DMSO Eluent)
42. MW Distribution Analysis (KF-406L HQ)