Effect of Sample Loads (ODP2 HP)

The relation between sample loads and thepretical plate number (TPN) for ODP2 HP 4D (4.6mm ID x 150mm length) is shown. Sample loads of 10µg or less are recommended with ODP2 HP-4D for best column performance and sample loads of 2µg or below are recommended for ODP2 HP-2D (2mm ID x 150mm length).

Sample : 5micro-L
Methyl bezoate
Ratio of TPN [%] : TPN at sample load of 5µg is set as 100%.

Column       : Shodex ODP2 HP-4D (4.6mmID*150mm)
Eluent       : H2O/CH3CN=55/45
Flow rate    : 1.0mL/min
Detector     : UV(254nm) Phenol, Methyl benzoate
               UV(300nm) Caffeine
Column temp. : 40deg-C